CWDM System
Description
According to the features of MAN high bandwidth requirement and short transmission distance,Flyin developed the CWDM system to be used in G.652, G.653, G.655. The equipment framework is 2U+1U, modular design, convenient expansion, which lasted the technical advantage of WDM high bandwidth. It has the advantages of multi-business interfaces, low cost, low power dissipation, small size, so it is widely used in MAN.
2U CWDM
Features
l SFP, SFP+ or XFP speed ratio: 155M, 1.25G, 2.5G, 4G, 10G.
l Flexible and transparent access for various rates and services including Ethernet, PDH, SDH, and CATV and etc.
l Expands capacity easily by inserting new CWDM OUT module cards. Support up to 16 channels per 2U rack-mount.
l Long distance transportation from 10KM to 120KM.
l Wavelength reshaping and signal amplifying. (1R or 3R optional)
l Up to 18 channel for passive CWDM and DWDM upgrading is supported.
l OUT interfaces support various equipments connections, including single mode signal, multi mode signal or RJ45 access.
l Transmission mode support: single fiber, Bidi and dual fiber, Bidi transmission.
l Flexible network management configuration based on SNMP. CLI, WEB and TELNET optional.
l 1+1 power supply backup system. Hot plugging for duplicate power supply is supported. DC or AC
Applications
l Line Monitoring
l WDM Network
l Telecommunication
l Cellular Application
l Fiber Optical amplifier
l Access Network
Specification:
|
System Parameters |
Technical Index |
|
|
Maximum system capacity |
4 channel / 8 channel / 16channe /18 channel x10G |
|
|
Wavelength range |
Comply with the ITU-G.695 standard |
|
|
Service Access Types |
PDH , ATM, SDH（STM-1~STM-64）OC-192/ OC-48/ OC-12OC-32 FE, GE, 10GE, FICON/ESCON/FIBER Channel/CATV |
|
|
Optical interface transmission |
1R/3R transmission, each channel rate supports 125Mbps~10Gbps(Optional) |
|
|
Physical network topology |
Point to point, Point to multi-points, Chain, Ring, BIDI |
|
|
Fiber Type |
G.652 G.653 G.655 |
|
|
Management System |
CLI /TELNET/SNMP/WEB |
|
|
Product Size |
2U OTU |
25(W)×88(H)×116(D) (mm) |
|
1U Rackmount |
440(W)×44(H)×230(D) (mm) |
|
|
2U Rackmount |
428(W)×88(H)×322(D) (mm) |
|
|
Environmental Requirement |
Operating Temperature |
-10℃ ~ 60℃ |
|
Storage Temperature |
-40℃ ~ 80℃ |
|
|
Relative humidity |
5% ~ 95% |
|
|
Power Supply Requirements(Standard) |
220 V/AC, 50Hz, -48 V/DC(Optional) |
|
|
Safety and EMC |
In line with the FCC, UL, CE, TUV, CSA standards |
|
|
Power Consumption |
10G, ≤ 60W |
|
Typical application
Ordering Information
CWDM Transmition System
|
HL1000C |
X |
XX |
X |
X |
X |
|
Passive Part |
System Type |
Number of Channel |
Transmission Type |
Management System |
Power Supply |
|
2 = 2U+1U |
04= 4 channel 08= 8 channel 16=16channel XX=Customize |
1=Dual fiber Bidirectional X=Customize |
1=With Management |
1=dual AC 2=dual DC |
